Smart Rest Roof Plate for Buggy

The Smart Rest Roof Plate for Buggy is a 3mm thick powder coated steel plate.

Convert the plastic buggy roof to metal plate which serves 2 purposes:

1 – Magnetise SpydaBot on to it. The advantage of this is to keep the SpydaBot adaptable to various vehicles.

2 – Mount Remote Handles RC500, RC504 and RC505 on the roof and prevent the plastic from buckling and bouncing. The slots already cut in the steel gives you a guide to cut the slot with a hole saw.

There are two ways to mount the plate on to the roof of the buggy.

 

Option 1 – Use a good quality Sikaflex/silicone polyurethane type of adhesive.

Option 2 – Use the four hole slots in the corners to bolt it on to the plastic roof.

Or you could do both if you feel it is necessary.

Dimensions:

45cm x 40cm – 3kg.

is a 3mm thick powder coated steel plate.

Convert the plastic buggy roof to metal plate which serves 2 purposes:

1 – Magnetise SpydaBot on to it. The advantage of this is to keep the SpydaBot adaptable to various vehicles.

2 – Mount Remote Handles RC500, RC504 and RC505 on the roof and prevent the plastic from buckling and bouncing. The slots already cut in the steel gives you a guide to cut the slot with a hole saw.

There are two ways to mount the plate on to the roof of the buggy.

 

Option 1 – Use a good quality Sikaflex/silicone polyurethane type of adhesive.

Option 2 – Use the four hole slots in the corners to bolt it on to the plastic roof.

Or you could do both if you feel it is necessary.

Dimensions:

45cm x 40cm – 3kg.