Wireless Switch 2.0 – Remote controlled On/Off Switch

Wireless Switch 2.0 remote controlled on/off switch turns on any laser or torch device wirelessly with the push of a button.

Utilizing a remote control pad to turn a light on or off, this wireless switch is battery powered and requires no external power source to run it. It is rechargeable and comes ready to use out of the box.

By simply wiring up the DC end (supplied) to your light device it is very easy to install and run. You can choose an option where we have pre wired the laser for you and it has been tested before we send it out. We have used a DC plug, to make the switch interchangeable from laser to torch or other devices.

We have built in a rechargeable 9V power source internally enclosed in the housing box provided.

This unit is primarily made for wireless remote controlled devices but can also be used in other applications up to 12V.

Includes: 

1 x Remote control pad (battery included)

1 x Module Switch device in black box

1 x 9V rechargeable battery connected (Note: We have installed a battery saver white rocker switch you will find on the case. Keep the switch off when not in use to save battery power. If it is switched on the battery will drain within 12 – 18  hours in which case you will need to recharge the battery).

1 x USB-C Charger cable for the 9V Battery

1 x velcro strip to attach to SpydaBot

1 x DC male adapter plug – DIY connection required

1 x DC Female adapter plug installed in the main black box

1 x Magnetic Mount Adhesive Set